The Best Bitcoin Wallets of 2020 Cryptocurrency US News
Data directory - Bitcoin Wiki
Bitcoin-QT should have a way to choose blockchain save ...
Bitcoin-QT, Electrum, MultiBit, Blockchain- My Wallet, Cold-Storage? What do you recommend someone that has never owned bitcoins?
I'd appreciate some expert knowledge, as all the information I read doesn't justify one service over the other. I'd like personal tales and relatable comments. I've read the Getting Started guide multiple times. Personally leaning towards having 'cold-storage' and putting a USB drive in my sock drawer at home. Please give me serious suggestions and ideas.
photorec finds lost wallets on DESTROYED storage devices, Bitcoin-QT, Blockchain.info and now Armory wallets too.
update of this post: http://www.reddit.com/Bitcoin/comments/1byfy0/photorec_able_to_find_lost_wallets/ answer from christoph grenie: << Bitcoin-Qt is the most important one and most used. Armory is the most secure client and widely used. If you could recover this format, people would love you.I dont know much about the other clients. There are even more than just those 4. I suggest you support armory.>> Done! I have added Armory detection in latest PhotoRec 6.14-WIP. Can you test it ? I am not using armory, so maybe someone would test it and i am not sure if photorec recovers encrypted wallets.
Bitcoin-QT, Electrum, MultiBit, Blockchain- My Wallet, Cold-Storage? What do you recommend someone that has never owned bitcoins?
I'd appreciate some expert knowledge, as all the information I read doesn't justify one service over the other. I'd like personal tales and relatable comments. I've read the Getting Started guide multiple times. Personally leaning towards having 'cold-storage' and putting a USB drive in my sock drawer at home. Please give me serious suggestions and ideas.
https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/18.104.22.168 Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that. Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap. We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout. Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.
Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now. Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date. The transition height is also when the team requirement will be relaxed for the network.
Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.
The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use. There are so many goodies here it is hard to summarize them all. I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures. The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!
Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.
Network magnitude unit pinned to a static value of 0.25
Max research reward allowed per block raised to 16384 GRC (from 12750 GRC)
New CPIDs begin accruing research rewards from the first superblock that contains the CPID instead of from the time of the beacon advertisement
500 GRC research reward limit for a CPID's first stake
6-month expiration for unclaimed rewards
10-block spacing requirement between research reward claims
Rolling 5-day payment-per-day limit
Legacy tolerances for floating-point error and time drift
The need to include a valid copy of a CPID's magnitude in a claim
10-block emission adjustment interval for the magnitude unit
One-time beacon activation requires that participants temporarily change their usernames to a verification code at one whitelisted BOINC project
Verification codes of pending beacons expire after 3 days
Self-service beacon removal
Burn fee for beacon advertisement increased from 0.00001 GRC to 0.5 GRC
Rain addresses derived from beacon keys instead of a default wallet address
Beacon expiration determined as of the current block instead of the previous block
The ability for developers to remove beacons
The ability to sign research reward claims with non-current but unexpired beacons
As a reminder:
Beacons expire after 6 months pass (180 days)
Beacons can be renewed after 5 months pass (150 days)
Renewed beacons must be signed with the same key as the original beacon
Magnitudes less than 1 include two fractional places
Magnitudes greater than or equal to 1 but less than 10 include one fractional place
A valid superblock must match a scraper convergence
Superblock popularity election mechanics
Yes/no/abstain and single-choice response types (no user-facing support yet)
To create a poll, a maximum of 250 UTXOs for a single address must add up to 100000 GRC. These are selected from the largest downwards.
Burn fee for creating polls scaled by the number of UTXOs claimed
50 GRC for a poll contract
0.001 GRC per claimed UTXO
Burn fee for casting votes scaled by the number of UTXOs claimed
0.01 GRC for a vote contract
0.01 GRC to claim magnitude
0.01 GRC per claimed address
0.001 GRC per claimed UTXO
Maximum length of a poll title: 80 characters
Maximum length of a poll question: 100 characters
Maximum length of a poll discussion website URL: 100 characters
Maximum number of poll choices: 20
Maximum length of a poll choice label: 100 characters
Magnitude, CPID count, and participant count poll weight types
The ability for developers to remove polls and votes
[22.214.171.124] 2020-09-03, mandatory, "Fern"
Backport newer uint256 types from Bitcoin #1570 (@cyrossignol)
Implement project level rain for rainbymagnitude #1580 (@jamescowens)
Upgrade utilities (Update checker and snapshot downloadeapplication) #1576 (@iFoggz)
Provide fees collected in the block by the miner #1601 (@iFoggz)
Add support for generating legacy superblocks from scraper stats #1603 (@cyrossignol)
Port of the Bitcoin Logger to Gridcoin #1600 (@jamescowens)
Implement zapwallettxes #1605 (@jamescowens)
Implements a global event filter to suppress help question mark #1609 (@jamescowens)
Add next target difficulty to RPC output #1615 (@cyrossignol)
Add caching for block hashes to CBlock #1624 (@cyrossignol)
Make toolbars and tray icon red for testnet #1637 (@jamescowens)
Add an rpc call convergencereport #1643 (@jamescowens)
Implement newline filter on config file read in #1645 (@jamescowens)
Implement beacon status icon/button #1646 (@jamescowens)
Add gridcointestnet.png #1649 (@caraka)
Add precision to support magnitudes less than 1 #1651 (@cyrossignol)
Replace research accrual calculations with superblock snapshots #1657 (@cyrossignol)
Publish example gridcoinresearch.conf as a md document to the doc directory #1662 (@jamescowens)
Add options checkbox to disable transaction notifications #1666 (@jamescowens)
Add support for self-service beacon deletion #1695 (@cyrossignol)
Add support for type-specific contract fee amounts #1698 (@cyrossignol)
Add verifiedbeaconreport and pendingbeaconreport #1696 (@jamescowens)
Add preliminary testing option for block v11 height on testnet #1706 (@cyrossignol)
Add verified beacons manifest part to superblock validator #1711 (@cyrossignol)
Implement beacon, vote, and superblock display categories/icons in UI transaction model #1717 (@jamescowens)
Bitcoin is a decentralized system, any user of which could control the movement of their own funds. You can use the currency to make transactions, pay for purchases, receive transfers, and exchange it for cash. For transactions, a special address is used, encrypted with a 16-character key. The buyer decodes the code to transfer bitcoins to the specified address.
Mining is a process that ensures the security of the BTC system, which adds new blocks to the blockchain in chronological order (new transactions). Blocks are added when the codes are decrypted, the transaction is completed, and bitcoins are transferred or exchanged. The main cryptocurrency is generated by miners using software that solves cryptographic problems. The reward for a new block is agreed by all network participants, but usually amounts to 12.5 bitcoins. Part of the user fees for transactions also goes to reward the miners. Cryptographic tasks become more complex every year to prevent inflation (mining complexity).
Features of the transaction
Anonymity. The address that Bitcoin is sent to consists of 30 characters. You can track the flow of transactions, but the address is not always associated with a real person.
Security. The balance of bitcoins is fixed in a cryptographic system with a public key. Only the owner of a private key can send cryptocurrency to other addresses.
Unable to cancel. It is no longer possible to cancel the transaction after the transaction has been completed.
Deregulation. Everyone can use cryptocurrency.
Coverage and speed. Information about the transaction is transmitted incredibly quickly, and confirmation is received within a few minutes. No one knows the buyer’s physical location.
Where to buy Bitcoin?
There are Deposit systems that use crypto-exchanges. So, to buy Bitcoin, you will first need to top up your balance, buy the digital currency itself, and then withdraw it to your Bitcoin wallet, paying a Commission for withdrawing coins. The cheapest method of buying is buying on the stock exchange. The exchange rate is as close as possible to the market rate.
The current exchange rate of the coin is calculated based on the average price on the largest currency exchanges. For example, you can track the exchange rate on our Bitniex exchange. The Bitcoin exchange rate is constantly changing, during the day it can change by 10% in one direction or another.
The choice of crypto-currency wallet
A cryptocurrency wallet is a place where digital currency will be stored. The most secure method of storage is using paper or electronic wallets.
TOP secure cryptocurrency wallets
These wallets are one of the most secure crypto wallets in the world:
Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything. The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years. In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.
UPDATED - Groestlcoin Core 2.18.2
This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables. NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.
Builds are now done through Gitian
Calls to getblocktemplate will fail if the segwit rule is not specified. Calling getblocktemplate without segwit specified is almost certainly a misconfiguration since doing so results in lower rewards for the miner. Failed calls will produce an error message describing how to enable the segwit rule.
A warning is printed if an unrecognized section name is used in the configuration file. Recognized sections are [test], [main], and [regtest].
Four new options are available for configuring the maximum number of messages that ZMQ will queue in memory (the "high water mark") before dropping additional messages. The default value is 1,000, the same as was used for previous releases.
The rpcallowip option can no longer be used to automatically listen on all network interfaces. Instead, the rpcbind parameter must be used to specify the IP addresses to listen on. Listening for RPC commands over a public network connection is insecure and should be disabled, so a warning is now printed if a user selects such a configuration. If you need to expose RPC in order to use a tool like Docker, ensure you only bind RPC to your localhost, e.g. docker run [...] -p 127.0.0.1:1441:1441 (this is an extra :1441 over the normal Docker port specification).
The rpcpassword option now causes a startup error if the password set in the configuration file contains a hash character (#), as it's ambiguous whether the hash character is meant for the password or as a comment.
The whitelistforcerelay option is used to relay transactions from whitelisted peers even when not accepted to the mempool. This option now defaults to being off, so that changes in policy and disconnect/ban behavior will not cause a node that is whitelisting another to be dropped by peers.
A new short about the JSON-RPC interface describes cases where the results of anRPC might contain inconsistencies between data sourced from differentsubsystems, such as wallet state and mempool state.
A new document introduces Groestlcoin Core's BIP174 interface, which is used to allow multiple programs to collaboratively work to create, sign, and broadcast new transactions. This is useful for offline (cold storage) wallets, multisig wallets, coinjoin implementations, and many other cases where two or more programs need to interact to generate a complete transaction.
The output script descriptor (https://github.com/groestlcoin/groestlcoin/blob/mastedoc/descriptors.md) documentation has been updated with information about new features in this still-developing language for describing the output scripts that a wallet or other program wants to receive notifications for, such as which addresses it wants to know received payments. The language is currently used in multiple new and updated RPCs described in these release notes and is expected to be adapted to other RPCs and to the underlying wallet structure.
A new --disable-bip70 option may be passed to ./configure to prevent Groestlcoin-Qt from being built with support for the BIP70 payment protocol or from linking libssl. As the payment protocol has exposed Groestlcoin Core to libssl vulnerabilities in the past, builders who don't need BIP70 support are encouraged to use this option to reduce their exposure to future vulnerabilities.
The minimum required version of Qt (when building the GUI) has been increased from 5.2 to 5.5.1 (the depends system provides 5.9.7)
getnodeaddresses returns peer addresses known to this node. It may be used to find nodes to connect to without using a DNS seeder.
listwalletdir returns a list of wallets in the wallet directory (either the default wallet directory or the directory configured bythe -walletdir parameter).
getrpcinfo returns runtime details of the RPC server. Currently, it returns an array of the currently active commands and how long they've been running.
deriveaddresses returns one or more addresses corresponding to an output descriptor.
getdescriptorinfo accepts a descriptor and returns information aboutit, including its computed checksum.
joinpsbts merges multiple distinct PSBTs into a single PSBT. The multiple PSBTs must have different inputs. The resulting PSBT will contain every input and output from all the PSBTs. Any signatures provided in any of the PSBTs will be dropped.
analyzepsbt examines a PSBT and provides information about what the PSBT contains and the next steps that need to be taken in order to complete the transaction. For each input of a PSBT, analyze psbt provides information about what information is missing for that input, including whether a UTXO needs to be provided, what pubkeys still need to be provided, which scripts need to be provided, and what signatures are still needed. Every input will also list which role is needed to complete that input, and analyzepsbt will also list the next role in general needed to complete the PSBT. analyzepsbt will also provide the estimated fee rate and estimated virtual size of the completed transaction if it has enough information to do so.
utxoupdatepsbt searches the set of Unspent Transaction Outputs (UTXOs) to find the outputs being spent by the partial transaction. PSBTs need to have the UTXOs being spent to be provided because the signing algorithm requires information from the UTXO being spent. For segwit inputs, only the UTXO itself is necessary. For non-segwit outputs, the entire previous transaction is needed so that signers can be sure that they are signing the correct thing. Unfortunately, because the UTXO set only contains UTXOs and not full transactions, utxoupdatepsbt will only add the UTXO for segwit inputs.
getpeerinfo now returns an additional minfeefilter field set to the peer's BIP133 fee filter. You can use this to detect that you have peers that are willing to accept transactions below the default minimum relay fee.
The mempool RPCs, such as getrawmempool with verbose=true, now return an additional "bip125-replaceable" value indicating whether thetransaction (or its unconfirmed ancestors) opts-in to asking nodes and miners to replace it with a higher-feerate transaction spending any of the same inputs.
settxfee previously silently ignored attempts to set the fee below the allowed minimums. It now prints a warning. The special value of"0" may still be used to request the minimum value.
getaddressinfo now provides an ischange field indicating whether the wallet used the address in a change output.
importmulti has been updated to support P2WSH, P2WPKH, P2SH-P2WPKH, and P2SH-P2WSH. Requests for P2WSH and P2SH-P2WSH accept an additional witnessscript parameter.
importmulti now returns an additional warnings field for each request with an array of strings explaining when fields are being ignored or are inconsistent, if there are any.
getaddressinfo now returns an additional solvable Boolean field when Groestlcoin Core knows enough about the address's scriptPubKey, optional redeemScript, and optional witnessScript for the wallet to be able to generate an unsigned input spending funds sent to that address.
The getaddressinfo, listunspent, and scantxoutset RPCs now return an additional desc field that contains an output descriptor containing all key paths and signing information for the address (except for the private key). The desc field is only returned for getaddressinfo and listunspent when the address is solvable.
importprivkey will preserve previously-set labels for addresses or public keys corresponding to the private key being imported. For example, if you imported a watch-only address with the label "coldwallet" in earlier releases of Groestlcoin Core, subsequently importing the private key would default to resetting the address's label to the default empty-string label (""). In this release, the previous label of "cold wallet" will be retained. If you optionally specify any label besides the default when calling importprivkey, the new label will be applied to the address.
getmininginfo now omits currentblockweight and currentblocktx when a block was never assembled via RPC on this node.
The getrawtransaction RPC & REST endpoints no longer check the unspent UTXO set for a transaction. The remaining behaviors are as follows:
If a blockhash is provided, check the corresponding block.
If no blockhash is provided, check the mempool.
If no blockhash is provided but txindex is enabled, also check txindex.
unloadwallet is now synchronous, meaning it will not return until the wallet is fully unloaded.
importmulti now supports importing of addresses from descriptors. A desc parameter can be provided instead of the "scriptPubKey" in are quest, as well as an optional range for ranged descriptors to specify the start and end of the range to import. Descriptors with key origin information imported through importmulti will have their key origin information stored in the wallet for use with creating PSBTs.
listunspent has been modified so that it also returns witnessScript, the witness script in the case of a P2WSH orP2SH-P2WSH output.
createwallet now has an optional blank argument that can be used to create a blank wallet. Blank wallets do not have any keys or HDseed. They cannot be opened in software older than 2.18.2. Once a blank wallet has a HD seed set (by using sethdseed) or private keys, scripts, addresses, and other watch only things have been imported, the wallet is no longer blank and can be opened in 2.17.2. Encrypting a blank wallet will also set a HD seed for it.
signrawtransaction is removed after being deprecated and hidden behind a special configuration option in version 2.17.2.
The 'account' API is removed after being deprecated in v2.17.2 The 'label' API was introduced in v2.17.2 as a replacement for accounts. See the release notes from v2.17.2 for a full description of the changes from the 'account' API to the 'label' API.
addwitnessaddress is removed after being deprecated in version 2.16.0.
generate is deprecated and will be fully removed in a subsequent major version. This RPC is only used for testing, but its implementation reached across multiple subsystems (wallet and mining), so it is being deprecated to simplify the wallet-node interface. Projects that are using generate for testing purposes should transition to using the generatetoaddress RPC, which does not require or use the wallet component. Calling generatetoaddress with an address returned by the getnewaddress RPC gives the same functionality as the old generate RPC. To continue using generate in this version, restart groestlcoind with the -deprecatedrpc=generate configuration option.
Be reminded that parts of the validateaddress command have been deprecated and moved to getaddressinfo. The following deprecated fields have moved to getaddressinfo: ismine, iswatchonly,script, hex, pubkeys, sigsrequired, pubkey, embedded,iscompressed, label, timestamp, hdkeypath, hdmasterkeyid.
The addresses field has been removed from the validateaddressand getaddressinfo RPC methods. This field was confusing since it referred to public keys using their P2PKH address. Clients should use the embedded.address field for P2SH or P2WSH wrapped addresses, and pubkeys for inspecting multisig participants.
A new /rest/blockhashbyheight/ endpoint is added for fetching the hash of the block in the current best blockchain based on its height (how many blocks it is after the Genesis Block).
A new Window menu is added alongside the existing File, Settings, and Help menus. Several items from the other menus that opened new windows have been moved to this new Window menu.
In the Send tab, the checkbox for "pay only the required fee" has been removed. Instead, the user can simply decrease the value in the Custom Fee rate field all the way down to the node's configured minimumrelay fee.
In the Overview tab, the watch-only balance will be the only balance shown if the wallet was created using the createwallet RPC and thedisable_private_keys parameter was set to true.
The launch-on-startup option is no longer available on macOS if compiled with macosx min version greater than 10.11 (useCXXFLAGS="-mmacosx-version-min=10.11" CFLAGS="-mmacosx-version-min=10.11" for setting the deployment sdkversion)
A new groestlcoin-wallet tool is now distributed alongside Groestlcoin Core's other executables. Without needing to use any RPCs, this tool can currently create a new wallet file or display some basic information about an existing wallet, such as whether the wallet is encrypted, whether it uses an HD seed, how many transactions it contains, and how many address book entries it has.
Since version 2.16.0, Groestlcoin Core's built-in wallet has defaulted to generating P2SH-wrapped segwit addresses when users want to receive payments. These addresses are backwards compatible with all widely used software. Starting with Groestlcoin Core 2.20.1 (expected about a year after 2.18.2), Groestlcoin Core will default to native segwitaddresses (bech32) that provide additional fee savings and other benefits. Currently, many wallets and services already support sending to bech32 addresses, and if the Groestlcoin Core project sees enough additional adoption, it will instead default to bech32 receiving addresses in Groestlcoin Core 2.19.1. P2SH-wrapped segwit addresses will continue to be provided if the user requests them in the GUI or by RPC, and anyone who doesn't want the update will be able to configure their default address type. (Similarly, pioneering users who want to change their default now may set the addresstype=bech32 configuration option in any Groestlcoin Core release from 2.16.0 up.)
BIP 61 reject messages are now deprecated. Reject messages have no use case on the P2P network and are only logged for debugging by most network nodes. Furthermore, they increase bandwidth and can be harmful for privacy and security. It has been possible to disable BIP 61 messages since v2.17.2 with the -enablebip61=0 option. BIP 61 messages will be disabled by default in a future version, before being removed entirely.
The submitblock RPC previously returned the reason a rejected block was invalid the first time it processed that block but returned a generic "duplicate" rejection message on subsequent occasions it processed the same block. It now always returns the fundamental reason for rejecting an invalid block and only returns "duplicate" for valid blocks it has already accepted.
A new submitheader RPC allows submitting block headers independently from their block. This is likely only useful for testing.
The signrawtransactionwithkey and signrawtransactionwithwallet RPCs have been modified so that they also optionally accept a witnessScript, the witness script in the case of a P2WSH orP2SH-P2WSH output. This is compatible with the change to listunspent.
For the walletprocesspsbt and walletcreatefundedpsbt RPCs, if thebip32derivs parameter is set to true but the key metadata for a public key has not been updated yet, then that key will have a derivation path as if it were just an independent key (i.e. no derivation path and its master fingerprint is itself).
The -usehd configuration option was removed in version 2.16.0 From that version onwards, all new wallets created are hierarchical deterministic wallets. This release makes specifying -usehd an invalid configuration option.
This release allows peers that your node automatically disconnected for misbehaviour (e.g. sending invalid data) to reconnect to your node if you have unused incoming connection slots. If your slots fill up, a misbehaving node will be disconnected to make room for nodes without a history of problems (unless the misbehaving node helps your node in some other way, such as by connecting to a part of the Internet from which you don't have many other peers). Previously, Groestlcoin Core banned the IP addresses of misbehaving peers for a period (default of 1 day); this was easily circumvented by attackers with multiple IP addresses. If you manually ban a peer, such as by using the setban RPC, all connections from that peer will still be rejected.
The key metadata will need to be upgraded the first time that the HDseed is available. For unencrypted wallets this will occur on wallet loading. For encrypted wallets this will occur the first time the wallet is unlocked.
Newly encrypted wallets will no longer require restarting the software. Instead such wallets will be completely unloaded and reloaded to achieve the same effect.
A sub-project of Bitcoin Core now provides Hardware Wallet Interaction (HWI) scripts that allow command-line users to use several popular hardware key management devices with Groestlcoin Core. See their project page for details.
This release changes the Random Number Generator (RNG) used from OpenSSL to Groestlcoin Core's own implementation, although entropy gathered by Groestlcoin Core is fed out to OpenSSL and then read back in when the program needs strong randomness. This moves Groestlcoin Core a little closer to no longer needing to depend on OpenSSL, a dependency that has caused security issues in the past. The new implementation gathers entropy from multiple sources, including from hardware supporting the rdseed CPU instruction.
On macOS, Groestlcoin Core now opts out of application CPU throttling ("app nap") during initial blockchain download, when catching up from over 100 blocks behind the current chain tip, or when reindexing chain data. This helps prevent these operations from taking an excessively long time because the operating system is attempting to conserve power.
How to Upgrade?
Windows If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer. OSX If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications. Ubuntu http://groestlcoin.org/forum/index.php?topic=441.0
ALL NEW - Groestlcoin Moonshine iOS/Android Wallet
Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network. GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.
Groestlcoin Mainnet & Testnet supported
Multiple wallet support
Electrum - Support for both random and custom peers
Biometric + Pin authentication
Custom fee selection
Import mnemonic phrases via manual entry or scanning
BIP39 Passphrase functionality
Support for Segwit-compatible & legacy addresses in settings
Support individual private key sweeping
UTXO blacklisting - Accessible via the Transaction Detail view, this allows users to blacklist any utxo that they do not wish to include in their list of available utxo's when sending transactions. Blacklisting a utxo excludes its amount from the wallet's total balance.
Ability to Sign & Verify Messages
Support BitID for password-free authentication
Coin Control - This can be accessed from the Send Transaction view and basically allows users to select from a list of available UTXO's to include in their transaction.
HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled. HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user. Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.
Simplified payment verification for fast mobile performance
Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases. This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats. To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.
If a word is wrong, the tool will try to suggest the closest option.
If a word is missing or unknown, please type "?" instead and the tool will find all relevant options.
NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator. VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline. If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address. VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase. VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).
Fixed size arithmetic
Fast Modular Inversion (Delayed Right Shift 62 bits)
SecpK1 Fast modular multiplication (2 steps folding 512bits to 256bits using 64 bits digits)
Use some properties of elliptic curve to generate more keys
SSE Secure Hash Algorithm SHA256 and RIPEMD160 (CPU)
Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet. If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).
Ability to continue finding keys after first one is found
Includes warning on start-up if connected to the internet
Ability to output keys to a text file (And shows button to open that directory)
Show and hide the private key with a simple toggle switch
Show full output of commands
Ability to choose between Processor (CPU) and Graphics Card (GPU) ( NVidia ONLY! )
Features both a Light and Dark Material Design-Style Themes
Free software - MIT. Anyone can audit the code.
Written in C# - The code is short, and easy to review.
Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode. This wallet was previously deprecated but has been brought back to life with modern standards.
Works via TOR or SOCKS5 proxy
Can use bootstrap.dat format as blockchain database
Import/Export blockchain to/from bootstrap.dat
Import wallet.dat from Groestlcoin-qt wallet
Export wallet to wallet.dat
Use both groestlcoin-wpf and groestlcoin-qt with the same addresses in parallel. When you send money from one program, the transaction will automatically be visible on the other wallet.
Rescan blockchain with a simple mouse click
Works as a full node and listens to port 1331 (listening port can be changed)
Fast Block verifying, parallel processing on multi-core CPUs
Mine Groestlcoins with your CPU by a simple mouse click
All private keys are kept encrypted on your local machine (or on a USB stick)
Lite - Has a lightweight "thin client" mode which does not require a new user to download the entire Groestlcoin chain and store it
Free and decentralised - Open Source under GNU license
Fixed Import/Export to wallet.dat
Rescan wallet option
Change wallet password option
Address type and Change type options through *.conf file
Import from bootstrap.dat - It is a flat, binary file containing Groestlcoin blockchain data, from the genesis block through a recent height. All versions automatically validate and import the file "grs.bootstrap.dat" in the GRS directory. Grs.bootstrap.dat is compatible with Qt wallet. GroestlCoin-Qt can load from it.
In Full mode file %APPDATA%\Groestlcoin-WPF\GRS\GRS.bootstrap.dat is full blockchain in standard bootstrap.dat format and can be used with other clients.
Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node. It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node. Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine. Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in. Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet. Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.
Use your own node
Uses less CPU and RAM than ElectrumX
Used intermittently rather than needing to be always-on
Doesn't require an index of every Groestlcoin address ever used like on ElectrumX
UPDATED – Android Wallet 7.38.1 - Main Net + Test Net
The app allows you to send and receive Groestlcoin on your device using QR codes and URI links. When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.
Add confidence messages, helping users to understand the confidence state of their payments.
Handle edge case when restoring via an external app.
Count devices with a memory class of 128 MB as low ram.
Introduce dark mode on Android 10 devices.
Reduce memory usage of PIN-protected wallets.
Tapping on the app's version will reveal a checksum of the APK that was installed.
Fix issue with confirmation of transactions that empty your wallet.
Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets). Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet. Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.
Litecoin Support Phone Number +1(855)3008358 (Toll-Free Number)
Litecoin was released in October 2011 in the form of a client with an open source code on the Internet hosting GitHub by Charles Lee, a former Google employee. The crypto currency works according to the MIT/X11 license, which allows anybody to execute, modify and copy software as well as to distribute any modified copies. It was a fork of the Bitcoin-Qt client, differing primarily by having a decreased block generation time, increased maximum number of coins, different hashing algorithm, and a slightly modified GUI. The Litecoin exchange rate gave a jump in November 2013: the capitalization of crypto currency exceeded 1 billion dollars.
Advantages and Disadvantages of Litecoin
It is an open source project.
Litecon is little faster than Bitcoin.
Transaction fee is almost zero.
All hardware wallets supports Litecoin.
As it was created by a former Google employee, which means reliable and more secure than the other cryptocurrencies.
Segwit has recently been included in Bitcoin that means advantage in Litecoin over Bitcoin is reduced.
Client code is not maintained properly.
Litecoin (LTC) is a decentralized cryptocurrency, a fork of Bitcoin intended by its designers to be more feasibly mined using consumer-grade hardware. Litecoin is a peer-to-peer crypto currency that was developed on the base of Bitcoin and has an open source code. Unlike Bitcoin, the Litecoin blockchain is able to process a greater number of transactions. The creator of Litecoin – Charlie Lee, a former employee of Google – took the Bitcoin source code as a basis and created a crypto currency that needs 2.5 minutes to generate a block – this is 4 times faster than Bitcoin.The full emission of Litecoin makes out 84 million coins, which is also 4 times more than of Bitcoin. The start reward for a block made out 50 Litecoins, and now it is 25 Litecoins.
Features of Litecoin
Transaction confirmation is faster
Increased storage efficiency
Coins to reward miners
Some common issues of Litecoin, We fix-
Trouble signing in on litecoin.com.
Unable to sell and buy Litecoin.
My password does not work.
Trouble connecting with the server
Unable to receive a Litecoin.
Litecoin hacking issue.
Unable to deposit and withdraw USD.
Wallet balance doesn’t show.
Hacking a payment gateway.
User address error.
Loss of a wallet file.
Unable to send a Litecoin
Unable to mine Litecoin.
Unable to send Litecoin from my account.
Unable to cash Litecoin.
Two-factor authentication failed.
Connectivity Issues or “Connection Error”
Unable to open the Litecoin wallet.
You can contact us for your queries and problems you faced during using litecoin on toll-free number : +1(855)-300-8358
Storage space: I am using an 8 GB microSD card for the OS, and a 128 GB USB drive for data. Minimums I would recommend: 8GB SD card and 32 GB USB drive.
Reddcoin Core client version: v126.96.36.199-a8767ba-beta (most recent version at this moment). ↳ Screenshot
You need the OS; Lubuntu. Download Lubuntu (707 MB) for the Raspberry Pi: https://ubuntu-pi-flavour-maker.org/download/. It's a .torrent download, so you will need a BitTorrent client. Message me or post in this thread if you need help with this.
You need software to write the OS to the SD card. I use Etcher. Download Etcher: https://etcher.io/.
Select image: select the lubuntu-16.04.2-desktop-armhf-raspberry-pi.img.xz file.
Select drive: select your microSD card.
Plug the SD card into your Raspberry Pi and power it up.
Lubuntu should boot up.
Set up Lubuntu, connect to the internet (wired or wireless). ↳ As username, I chose "rpi3b". You will see this username throughout this whole tutorial.
Make sure date and time are correct ([Menu] > System Tools > Time and Date). ↳ Click on Unlock to make changes. I personally change Configuration to "Keep synchronized with Internet servers". ↳ Screenshot
Reboot ([Menu] > Logout > Reboot). I am connected to wifi, but have issues getting wifi to work on initial boot. A reboot solves this issue.
Make sure system is up-to-date, install never versions.
Open LXTerminal ([Menu] > System Tools > LXTerminal). ↳ Screenshot
Enter the following in LXTerminal: sudo apt update && sudo apt upgrade ↳ Screenshot
You will be asked if you really want to continue. Enter Y (yes).
Updates are being installed! Wait until it's finished.
Install programs that will be used in this tutorial.
GParted: to partition the USB drive.
Htop: to see the amount of memory (RAM) and swap that is in use.
Enter the following in LXTerminal to install these 2 programs. sudo apt install gparted && sudo apt install htop ↳ Screenshot
Create 2 partitions on the USB drive: 1) Swap partition 2) data partition (for the Reddcoin blockchain) The swap partition is necessary: The Reddcoin wallet can be memory intensive. To prevent any crashes or freezes, add 2 GB of 'virtual' memory by creating a swap partition.
Important: Backup your USB drive if needed. The USB drive will be formatted, so the data on the USB drive will be wiped.
Please use the USB drive solely for this purpose, do not combine it with other stuff.
Keep your USB drive plugged in, do not (randomly) plug it out.
Plug your USB drive in.
GParted will be used to create the partititons. Start GParted via LXTerminal: sudo gparted ↳ Screenshot
Apply the changes. Click on the check mark or select Edit > Apply All Operations. ↳ Screenshot ↳ Screenshot
Important: The name of the swap partition is needed later, so please write it down. Mine is /dev/sda1 (first partition on first drive (drive 'a')). ↳ Screenshot
Reboot. After the reboot, the data partition you just created should be visible on your desktop. ↳ Screenshot
The swap partition is created, so now we can enable and use it.
The swap in use can be monitored with the program Htop. Open Htop ([Menu] > System Tools > Htop) to see the 'Swp' (swap) in use. ↳ Screenshot By default, swap is not used, so 0K. ↳ Screenshot You can leave Htop open.
To enable the swap partition, open LXTerminal and enter the following commands: (Assuming /dev/sda1 is your swap partition.)
Unpack the file (large file, takes around 15 minutes to unpack): sudo xz -d bootstrap.dat.xz ↳ Screenshot
After a successful unpack, your will find the file bootstrap.dat in your USB root folder. ↳ Screenshot
On the first run of the Reddcoin Core client, it will ask for a data directory to store the blockchain and wallet data.
Start the Reddcoin Core client: sudo /media/rpi3b/usb/reddcoin/src/qt/reddcoin-qt ↳ Screenshot
The welcome screen will appear and ask you about the data directory. I suggest a new folder on your USB drive, I picked blockchain. The directory will be created with all the necessary files. ↳ Screenshot
Click on the three dots (...) on the right. ↳ Screenshot
Click on Create Folder at the upper right corner. Type and enter in the folder name. (In my case: blockchain.) Click on Open. ↳ Screenshot ↳ Screenshot ↳ Screenshot
After selecting the directory, the Reddcoin Core client will start. Wait till it's fully loaded and close it.
Move the bootstrap.dat file to your data directory you selected in the previous step. By doing this, Reddcoin Core will use the bootstrap.dat file to import the blockchain, which speeds up syncing. sudo mv bootstrap.dat /media/rpi3b/usb/blockchain/ (Assuming blockchain as data directory.) ↳ Screenshot
The Reddcoin Core client set up is completed, but you still have to sync fully with the blockchain before you can send, receive and stake.
Keep the client running until it's fully synchronized. It will use the bootstrap file first, and download the rest of the blockchain to complete the sync. This can take some time (it took 2 days for me). Syncing the blockchain uses a lot of resources, so the software may react slow.
You can see the progress in the debug window (Help > Debug window). ↳ Screenshot
When the synchronization is completed, the red (out of sync) will disappear on the Overview screen! ↳ Screenshot
When synchronization is complete, you can start staking your Reddcoins.
You can write down your private key or copy and save it in a document. Make sure you save it somewhere only you can access it.
To import later: Debug window -> Console -> importprivkey [label] [label] is optional. ↳ Screenshot (without a label) ↳ Screenshot (with a label)
Boot with only 1 USB drive plugged in: Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly. If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
Start Reddcoin Core easier Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
Right Click on your Desktop and select Create New -> Empty File. ↳ Screenshot
Enter a file name, make sure it ends with .sh, and click on OK. I've chosen for Reddcoin.sh. ↳ Screenshot The file will be created on your Desktop. ↳ Screenshot
Add the command to start Reddcoin to the file.
Right click on the file, select Leafpad (to open the file in a text editor). ↳ Screenshot
Add the following to the file and save the file: sudo /media/rpi3b/usb/reddcoin/src/qt/reddcoin-qt ↳ Screenshot
To be able to execute the shell script (.sh), it has to have 'execute permissions'.
Right click on the file, and select Properties. ↳ Screenshot
Click on the Permissions tab.
For Execute, select Anyone, and click on OK. ↳ Screenshot
To start Reddcoin Core, double click on the file. A new window will pop-up, asking you what you want. Execute in Terminal is what we want, so you can click on enter. ↳ Screenshot Reddcoin Core will now start. Do not close the Terminal window, you can minimize it if needed.
Minimization options Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
Activate 'Minimize on close'. Settings -> Options... -> Window (tab) -> Minimize on close. ↳ Screenshot Reddcoin will still run when you click on the X button. To close/exit Reddcoin, right click on the Reddcoin icon in the system tray (bottom right corner). ↳ Screenshot
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
After your download is finished, open the file and click Install Package. ↳ Screenshot
To run the VNC Connect once:
Open [Menu] > Run, and enter: vncserver-x11 ↳ Screenshot
To auto run on startup:
Open Default applications for LXSession ([Menu] > Preferences > Default applications for LXSession). ↳ Screenshot
In LXSessions configuration, select Autostart in the menu left.
Under Manual autostarted applications, enter vncserver-x11 and click on + Add. ↳ Screenshot ↳ Screenshot
Reboot your Raspberry Pi and check if VNC Connect is started automatically after the reboot.
When VNC Connect is running, you'll see a VNC icon on the right bottom corner. Double click the icon to open VNC Connect and to see the IP address you need to enter to connect to your Raspberry Pi. ↳ Screenshot
Beginners guide to Syscoin (SYS) and why you should be investing in this cryptocurrency in 2018
What is Syscoin?
Some have described Syscoin(SYS) as the Shopify, Amazon and Ebay of the blockchain world. Syscoin is a revolutionary cryptocurrency that offers near zero cost financial transactions, incredible speed and provides businesses the infrastructure to trade goods, assets, digital certificates and data securely. Syscoin isn’t just about money and trading, it has the ability to attract various business types thanks to its native set of features geared towards business on the blockchain. From eBay traders and High Street shops to Medical applications, Insurance and Gaming, Syscoin’s decentralized network benefits everyone! Syscoin is developed by Blockchain Foundry (BF). BF provides blockchain technology based services, projects and products for a wide variety of use cases with the stated aim of disrupting markets by leveraging the potential of blockchain technology. Syscoin is mainly known to be the first cryptocurrency to offer a fully decentralized marketplace based on blockchain. What is lesser known is that this is only a part of what Syscoin offers. With the introduction of Masternodes in February or March 2018 SYS will be transformed from just a ’marketplace coin’ to a completely ‘utilitarian coin’. The Masternode infrastructure allows the addition of decentralized databases and file storage, increased transaction speed to surpass POS/Visa/Mastercard capabilities, true Turing complete smart contract capabilities for unlimited business logic, sidechains, application layers and an identity layer. This will all be accessible through an API, rather than a new language, enabling nearly any developer to create any blockchain application they can conceive. This will usher in the next generation of blockchain applications - made for new or existing businesses - by conveniently offering everything available from the blockchain space today.
The blockchain as conceptualized by Satoshi Nakamoto back in 2008 envisioned a peer-to-peer electronic cash network that would prevent double-spending. A year later, the blockchain became an integral part of bitcoin, serving as the latter's public ledger of transactions. Although Nakamoto's reference client mentioned a decentralized marketplace service, the subsequent implementation did not incorporate this due to a lack of resources. Syscoin was initially described in a 2014 draft whitepaper that envisioned Decentralized Marketplace Creation, Decentralized Smart Contracts and Documents, Decentralized Certificate Issuance and Transfer, and Decentralized Data Storage and Retrieval, as among the services that it would offer upon its release. Syscoin aimed to bring Nakamoto's vision of a decentralized marketplace back into the blockchain, among the other commercial-grade services it aims to deliver to clients. Other services that Syscoin plans to provide include secure data storage and transfer, and unique user aliases that link their owners to the services controlled by the alias. The early Syscoin wallet was superseded by the release of Blockmarket Desktop 1.0 on September 12, 2017, marking the culmination of Syscoin's vision of a fully decentralized marketplace with a desktop GUI based on the blockchain. The planned release of Blockmarket Web, a fully web-based version, and Blockmarket Professional in 2018 takes that vision one step further, as more advanced seller stores become a reality.
The Team that NEVER quits! Before the launch of Syscoin (Q3 2014), there was a presale ICO by Moolah (as a partner), which turned out to be detrimental for Syscoin. The project raised around 1,000BTC for development but the Syscoin Team only managed to access 250BTC which were used for price support. Moolah (Ryan Kennedy) absconded with the bulk of the ICO funds and the Syscoin team were left with ~30million Syscoin at a price around 400 satoshi. Even after this tragic event, the devs didn’t quit and continued to work on the project without stopping. The case against Moolah is still on-going. See the article from CoinDesk here: http://www.coindesk.com/uk-court-syscoin-injunction-moolah-750-btc/. What is this detail telling us about the dev team? While some crypto projects are just scams and bring little to no innovation, they’ve proven that they are in it for the long term - ably demonstrated by the fact that they continued to work despite their funds being stolen. And now that hard work is beginning to pay off with the entire team going full-time for the first time in January 2018 and new developers being hired following VC funding for BF.
Building on the World's First Decentralized Marketplace, Blockmarket is the newest generation of Syscoin's Desktop wallet with a complete, state-of-the-art marketplace built-in where you can securely and reliably buy and sell any items you wish. Entire stores can be created directly through the marketplace where you can sell your own products or re-sell others’ products for commission. Use of blockchain technology eliminates middlemen, credit card fees, maintenance fees, downtime and political interference. Persons are literally able to buy or sell anything to anyone, anytime, anywhere on Earth! Blockmarket Desktop was launched on September 12, 2017.
Key Blockmarket Features
Decentralized Marketplace The marketplace platform provides a decentralized and high redundant channel for selling goods and services. Features include:
• Price Pegging to currencies such as USD, EUR, GBP, CAD, CNY and BTC • Bitcoin and Zcash as payment options • Arbitrated Escrow • Encrypted Messaging • KYC/AML Compliance • Images • Unlimited Inventory Items
Wallet addresses for cryptocurrencies generally consist of a unique string of between 27-34 alphanumeric characters. Such an address isn’t easy to memorize. Although the addresses can be added to an address book within the wallet, Syscoin has taken the user's convenience one step further, allowing you to create a unique Alias for your wallet address, such as a name, title, or characters specific to a username. These can be used to send SYS from home, to a mobile wallet, to work, to friends, to common suppliers or to repeat customers easily, without requiring any memorizing, writing it down, copy & pasting or emailing yourself the address.
Using the cryptography of the blockchain persons can issue, authorize, and exchange digital certificates of any kind. With Syscoin anyone can issue provably-unique certificates with text or ASCII content to one or multiple parties on the Syscoin blockchain. These certificates can be authenticated by anyone via Syscoin’s cryptographic proof of work. This allows for the creation and free exchange of any kind of digital asset such as ownership certificates, warranties, receipts, tickets, certifications, diplomas, software licenses and more.
Integrated Crypto exchanges - Flypme and Changelly will facilitate exchanging 30+ cryptos for SYS, directly within the Blockmarket wallet.
BM web will bring SYS’s existing decentralized marketplace and all its features into a web-based version, enabling ease of use with a simple email and password login (grandma friendly) without any need for downloading a wallet or waiting for sync. Blockmarket web will be launched in February 2018.
Ability for world-class transactions-per-second performance to scale-out with added nodes (theoretically 100k TPS per 1000 Masternodes, 300k TPS/3k masternodes, etc). In later releases, masternodes will also process smart contracts and facilitate sharded+encrypted offchain file-storage (with onchain anchors), among other touted functionality. They should also result in steadying the price movements - less volatility as holding will be incentivized
Scalable Ethereum Virtual Machine: Allows Turing complete smart contracts to be executed following the ethereum protocol at a much faster speed and at a fraction of the ethereum gas price.
Assets & Token Issuance
With its token issuance service, Syscoin allows anyone to create a custom asset token which can then be sent directly to anyone else on the network. This facilitates a variety of use cases including ICO token issuance, supply chain management, reward points, and loyalty programs.
Anonymous transactions: via mixing/shuffling at user-specified denomination. Afterwards, additional tech will be added in the near future which will further compound the degree of anonymity provided -Add ValueShuffle running on top of the masternode layer and you have the world's most advanced privacy tech in any coin. This brings true money fungibility to Syscoin and the missing link for true economic sovereignty. https://twitter.com/realSidhuJag/status/948588279540035584
Transactions can be sent and received instantly. This represents a similar sending capability as Dash, but is a step beyond- A type of backend node locking will allow an instantly received sum to be sent immediately, without delay, and without network risk of double-spend.
Because cold wallets, such as those stored offline in a text file as I keep recommending in my standard advice below: All you need is a text file to put your wallets in, like this example from https://walletgenerator.net/?currency=Dogecoin 1,"D7WBUpdgLRtG6WyPsqjhaKiJR65X8ZGnkZ","6KieLMW1poAzNVnmLuQZqA262gxEQ51eLGdDK8e2GL2B4LHCKKb"2,"DM8LT16d49zHr8ByXbUwZb9UBXDGMaZRdc","6Ktgxdv6vN9v2bDHwcJBBb3oMRAgXJumESzBnxaXUSGFZoq6pWQ"3,"D5UCa51AfxjtVHQ46oYXe2YfkctTeLXPhx","6L2WSPWadRYCwt2L1CxH6zC7PoTYY3KyjxdiUoCqi5eyq6hQKvj" Use https://coinb.in/#settings to move coins. Download both sites and run them offline. Use https://bitinfocharts.com/dogecoin/ to check balances and transactions. See http://www.mocacinno.com/blog/create-sign-broadcast-transactions-using-coinb/ for coinb.in tutorial. And read the ELI5s (and my history) for more info. Are without doubt THE SAFEST way to store your coins. Plus, they consume no resources. No bandwidth, no network stress for every node we have, no storage of 20Gb+ blockchains, no weeks of waiting for things to sync, no tearing your hair out and posting desperate pleas for help, and most importantly, no coins irretrievably lost because you or your client screwed up.
Wallets, ALL WALLETS are nothing but numbers. Very large numbers, but fundamentally no different from “7”, “42”, “911” or a phone number. They cannot be created nor destroyed, and you either know them or you don’t. Anyone who knows a key can use it to spend any coins it controls. Anyone who doesn’t know it, can’t. Don’t be the guy who doesn’t know his own keys. Keep them safe. Make copies. Keep those safe. Don’t let your friends, kid brother or random burglar find them, but don’t lose them either. The only other thing you need for a fully functional wallet is a way to spend coins. Coinb.in is such a way. There are others, such as DogeCoinMultiSig.org which tomcarbon built. Oh, and you can and should download it and run it locally.
The default entry point for coinb.in is https://coinb.in/#settings because this settings page is very well hidden. Its in the tiny gear wheel on the Broadcast page. Looking across the top of the page, you can see
We’re only going to use three of these. New, Sign, Broadcast. Now, keep in mind that coinb.in is an old Bitcoin tool which tomcarbon added Dogecoin to. Sometimes it thinks its dealing with Bitcoin still, so if you see anything odd, go and make sure you’ve selected Dogecoin in the Settings page.
This tool should be the only place you spend coins. Sure, some clients may look more convenient, but they all suffer from a very big coin-losing flaw. Whenever you split a UTXO, they create a new wallet to send the change to. And they DON’T TELL YOU! This means unless you back up after every transaction, you run a high risk of finding all your coins have ‘disappeared’ from your wallet, and you don’t recognise where they went. So if you use a client for the convenience as well as a text list of your wallets, you won’t know to add a new wallet to your masterfile. Its best to ditch the clients entirely.
Now we come to the nitty-gritty. Lets use those three wallets above and assume that #1 is the source, #2 the destination and #3 the change wallet. Note that these won’t actually work, as none of them have ever been used, but they will do as examples. New Transaction Located at the bottom of the New menu, this will give you a page to enter your wallets and amounts. In the top field, you enter your source address or Key. If you use the key, it will calculate the address when you click the Load button, which should match what you expected. Note that Load only brings in the first 100 UTXOs. This is so that you can retrieve coins from high-volume wallets which would kill any client. Coinb.in is in fact the ONLY WAY to do this, as even QT falls over around 600 UTXOs. You will see the total balance that was loaded in the Transaction Fee field. And also in the Inputs tab, where you can go to adjust which UTXOs to spend. Now you need to add the wallet(s) and amounts to send to them. Lets suppose the source contained a single UTXO for 1,000 Doge. You want to send 500 of them. So you would enter the #2 address in the Address field, and 500 in the Amount field. The Fee now changes to 500, which is not what you want. So you click the + button to bring up a new line, enter the change address and the other 500, making the fee zero. And you’re done. Check that the Fee is indeed zero. Check that the amounts shown in the Outputs and Inputs tabs match exactly.
THIS IS CRITICAL!
There is a bug which will send all the coins to the miners if the Outputs exceed the Inputs. I would have expected the Fee to show as negative in such a situation, but it doesn’t. BE WARNED! Once everything looks right, hit the Submit button. This will give you a block of hex code. Copy it. Sign Go to the Sign tab and paste it. Add your private key for the source wallet and click Submit. Note this can be done offline for safety. This will give you another block of hex, the SIGNED transaction. Broadcast Copy this and paste it in the Broadcast tab and click Submit. That’s it. Your coins are on their way. Make a cuppa and settle in while they arrive in a minute or three. Note: All fields retain their values unless you refresh the page! This can be a boon when doing multiple transactions, such as when emptying a huge wallet. But it can also be a trap for the unsuspecting. Refresh or close the window when you’re done.
Who should use this? Absolutely EVERYONE! Even if you’re wedded to your client in some satanic blood-contract, you should still know how this works, because sooner or later you’re going to have a problem you can’t fix without it. Definitely download the site and store it on every device you have. On every USB backup of your wallets. On your phone (well, except iOS which doesn’t do local HTML), etc, etc, etc. Oh, and if you’re a programmer SmartyShibe, do consider improving the code over on GitHub. EDIT:https://github.com/OutCast3k/coinbin added courtesy of AtomHearth
What is Ren? Ren is an open protocol that enables the permissionless and private transfer of value between any blockchain. Ren's core product, RenVM, brings interoperability to decentralized finance (DeFi). What makes RenVM unique is that it does everything in secret using zero-knowledge proofs over an sMPC based protocol that the team has pioneered. The state, inputs, and outputs of all programs that RenVM runs are kept hidden from everyone, including the Darknodes that power it. This allows RenVM to securely manage (ECDSA) private keys on different blockchains, making it possible to shift tokens between these blockchains in a fully trustless, permissionless, and decentralized way (i.e interoperability). Technically speaking RenVM is a byzantine fault-tolerant protocol (with 1/3 malicious nodes) that does ECDSA threshold key generation and signing via sMPC. RenVM is not a product or an application in and of itself but is a network (and an accompanying SDK) that allows developers to bring interoperability to their DeFi applications. Ren was founded in 2017 and is headquartered in Singapore.
Darknodes Darknodes are the physical machines that power RenVM, where every machine contributes CPU time for compute power and its disk space for storage. These are that machines that form the P2P decentralized network (not a blockchain) that cooperate to run secret multiparty computations. It is important to note that programs executing on RenVM are hidden from the Darknodes that run the virtual machine. This guide will walk you through the installation of your Darknode. Before you begin, make sure that you have a MacOS, Windows, or Ubuntu machine available (i.e. home computer) and 100,000 REN. Guides: How to set up a Darknode The Team
What happened to the Republic Protocol? Republic Protocol was rebranded to Ren to reflect the project’s evolution towards interoperability (i.e. RenVM). Old posts and discussions can be found on the Republic Protocol Reddit
We truly appreciate our community, and this cannot be said enough. The level of technical understanding and subsequent assistance provided to our newcomers, speaks to the expertise and positivity in the community, and we couldn’t be more thankful. We look forward to collaborating with everyone as we make our next steps forward towards building a cross-chain DeFi ecosystem. If you are interested in working directly with the Ren Team we are always looking for developers so please do reach out via the below email. Need help or want to partner? [[email protected]](mailto:[email protected])
There is a discussion about nodes that came up today, where it seems I'm discouraging people from running the full QT/Core client. Yes and No. What I'm trying to make sure people understand is how things work, and that it is NOT mandatory to run a client in order to use Dogecoins (and yes, I realise that browser-based tools like coinb.in and wallet sweepers are 'clients' by strict definition). That said, more nodes is absolutely a good thing for the network. Preferrably full nodes. How do you run a full node? Just run Core/QT and open up Port 22556 on your router so it can connect to more than 8 peers. What will it cost you? You need your machine to be on 24/7/365, you need enough storage for the full blockchain (currently about 20Gb. Bitcoin is over 120Gb) and enough bandwidth to keep it in sync and share blocks with peers. A couple of Gb a month, most likely. This is best done with a desktop on a wired broadband link. Or maybe a hosted VM in the cloud. :)
EDIT 2017-01-09: Wallets WITHOUT Clients
Since I started helping people on /BitcoinBeginners, I'm getting a lot of questions about how to use wallets without running clients or trusting third parties. So here are a couple of resources that will make that possible, and not just for Dogecoin: Multi-Coin Wallet GeneratorNow supporting 129 currencies!Coinb.in Start by setting the currency, found in the gear wheel in the Broadcast tab. Dogecoin Wallet Sweeper Redeem 'paper' wallets containing up to about 100 UTXOs. Bitinfo Charts My favourite block explorer, handles a bunch of cryptos. Using these resources, it is possible to hold, receive and spend coins in various currencies, without having to run QT or a 'lite' client. You can also download and run the pages on your own device.
EDIT 2016-11-23: SEMANTICS about MINING! :P
Even though there is already a section on mining below, it has been suggested given the huge number of posts on the subject that this needs to be made clearer. Since people get their panties in a twist over the word 'dead', lets change that...
MINING IS DEAD!
MINING DOGECOIN IS UNPROFITABLE!
Put simply, there is no way to mine Dogecoin and make a profit because of the massive hashpower provided by industrial-scale Litecoin miners. Mining Doge directly stopped being viable when our hashrate exploded with the introduction of AuxPoW. Mining with CPU's and GPU's died when ASICs were introduced. And mining with a laptop WILL kill your laptop and cost you a fortune to repair or replace. Mining Litecoin with an exchange that also mines Doge and others will earn less than the electricity consumed, and you won't recover your costs. Probably ever, but certainly not in any reasonable time. Mining other currencies may be a thing, but that's beyond our scope here. This is /Dogecoin, not /GetRichMiningCryptos after all. If you want to mine the newest scamcoin for fun and profit, look elsewhere for advice. :/ Oh, and most important:
READ BEFORE YOU POST!
At any given time, there are half a dozen posts on the frontpage just like the one you're about to write, where the answers have already been given. Read them. Don't make people waste their time repeating themselves because you were too lazy to bother reading stuff. :P So there I was, having a quiet Sundy arvo bludge, as you do, when 42points turned up on Facebook and asked me to write a new sticky post for /dogecoin. Why would he do this, when he should be having a bludge himself, I hear you ask? Well, seems he was doing exactly that, and wanted to fob off the work he’s too slack to do himself. ;) Ah well, being a sucker for punishment, I’ll grudgingly oblige I guess. OK, first things first.
A client is a piece of software you keep on your computer which holds one or more wallets. Here are the current client versions. If you're using an older client please upgrade to the newest version prior to sending/receiving coins. Backup! Backup! Backup your wallet.dat file or private key so you can import them into the latest version of the client.
Be warned that unless you’re running Core (aka QT), you could have issues with wallets containing lots of UTXOs (Unspent Transaction Outputs - Where your coins REALLY live). Go read the ELI5 below, and keep a close eye on your transaction counts. If you DO run Core, realise that all full clients, regardless of the coin, require a copy of the blockchain and must keep it up to date. This will cost you time, storage space and bandwidth. You can save a little by downloading the bootstrap file though. I haven’t checked how recent this one is, so let me know if you find a more current version.
OK, so next, grab this wallet generator. Even if you plan on running a client(s). Because a) it does many, many cryptocurrencies, and b) you WILL need wallets at some stage over and above what you keep in your clients. Just be sure to run it locally (and offline if you’re truly paranoid).
Oh, and here’s a simple way to keep track of all your wallets using HTML. You can grab the source and modify it, then upload it wherever you need to suit your needs. You will also want a separate file with your private keys, but don’t upload that one anywhere, because if you lose your keys or someone else gets access to them, you will lose your coins.
Next, be aware that there are online wallets available. While any wallet you don’t own the keys to isn’t actually yours, and therefore isn’t safe, the following are safer than most. Dogetipbot of course is used daily by shibes on Reddit. Block.io uses multisig and gives you Doge, BTC and LTC wallets as well as testnets, and Dogechain gives you your private keys (and also offers a wallet sweeping service).
Exchanges also offer wallets, of course. Not that you should use them to store your hard-earned coins, because they can and do get hacked with monotonous regularity. But at some stage you’re going to want to trade, or hold a few uncommon coins. You could do worse than these three:
And then there’s the obligatory question of mining. Put simply, mining is for all intents and purposes dead, and has been for a long time now. The costs are greater than any possible returns. But, if you insist on doing it anyway, maybe because you inherited a miner, you can earn about 0.01 LTC/day per MH/s merge-mining at Litecoinpool. That’s about 4 cents. :(
Shibes sometimes complain that the devs are not as active in /dogecoin as they used to be. You can find them on IRC, slack or their very own sub if you need them though. Or poke sporklin, who can often help.
You can of course ask any questions here, or post them in the sub. However, do try searching first, because I guarantee every possible question has been asked many times before. And you should also subscribe and hang out in /dogeducation occasionally. There’s much awesomeness there.
From peoplma I was wondering if you could add just a couple things. A link to the coinomi android wallet, it's probably the best one out there. And a sentence somewhere along the lines of "if you need help with any dogecoin software you are welcome to make a post, but PLEASE include your OS, version number of the client, and any relevant transaction IDs that you are willing to share" if you can fit that in somewhere. Also, if you want to link to Prohashing, I'm pretty sure it's the only Scrypt mining pool that will actually pay out in doge. The others I know of pay out in litecoin or bitcoin. And it's a profit switching multipool, so gives a better return than just mining ltc/doge. And there's these two wiki articles I thought would be helpful to link /dogecoin/wiki/technical for those technically minded newbies or intermediate users who want to dig a little deeper. And maybe a link to /dogecoin/wiki/dogecoincoreguide next to the link for dogecoin core. From pts2002 Finally a proper sticky post! Here's some other stuff you could add: zpool.ca mining pool - You can get paid in pretty much any coin, and you can mine in multiple algos (currently mining lyra2v2 with my GPU). Doing about 500Ð/day shapeshift.io exchange - My favourite exchange, quick and easy. No registration required! Also, you should add some blockchain explorers! chain.so - Support for bitcoin, litecoin and doge. dogechain.info - Official blockchain explorer. Includes a wallet (already mentioned). Live update currently not working (?) EDIT: Here's another thing I found! preev.com currency value calculator - Easy way to check the value of your dogecoins (or bitcoins, or litecoins, or peercoins)!
There is a huge surge in devices attached to the internet, known as the Internet of Things, and it is estimated that over 80 Billion devices will be connected to the internet by 2025, from industrial machines to devices in our home. The constant hacking and cyber attacks have increased not only the demand but the necessity of secure solutions. Our privacy and digital footprint are at risk. [b]Some examples where encryption plays a role: [b]Secure messaging - To make messages truly secure we need a process whereby a cryptography can be applied to encrypt transaction. [b]Secure calling - Secure calling is a process whereby the caller and the recipient of the call are identified and linked via a blockchain enabled cryptocurrency transfer, again creating public and private encryption keys making the call truly private. [b]Secure media storage - To safely and securely store media a process is required where 1.) Access to the media is encrypted via public and private keys of the person wanting to store the media. 2.) The media itself needs to be encrypted with a set of encryption keys and 3.) Media storage costs need to be paid via cryptocurrency [b]Secure browsing - To browse the internet securely we need to create a process of verification whereby nodes on the blockchain can verify websites as “safe”. Furthermore, the entire process needs to be encrypted as well. [b]Verification - This is one of the most important uses of a blockchain, we can verify websites as in the example above but also various other things such as identity, title and ownership, date stamps and source of products as with the verification of the source of agricultural or other products. These are just a few examples. All of this data needs to be encrypted as well. [b]“Smart home” security - Wi-Fi is often used for remote monitoring and control. Home devices, when remotely monitored and controlled via the Internet, are an important constituent of the Internet of Things - all needing encryption, otherwise, hackers paradise. [b]EOT in the future - The examples we mentioned above are only “scratching the surface” of where these technologies are applicable and who knows what will be invented in future. Google, Apple and Uber are all testing cars that drive themselves. A major issue with this technology is again the security aspect and the need to protect against hacking and who want’s to get into a spaceship to Mars that might be hacked or hijacked by ransomware? So the future for the [b]“Encryption of Things” – EOT, looks very interesting indeed and the role of crypto currencies in this will be major. Read the full white paper here - http://eottoken.com/index.php/whitepape The first device using EOT Coin is the BitVault®[/b] - the World's first crypto communicator and blockchain phone. The BitVault is a revolutionary new product that is built around security and privacy enabled through Blockchain technology. Biometric Security enabled through fingerprint and iris scan. Iris patterns are unique to you and are virtually impossible to replicate. This means that iris authentication is one of the safest ways to keep your BitVault locked and the contents private. Proven Biometric technology brings a whole new level of security to your crypto currency and blockchain transactions. Creating Military grade security for your device through third party independent Multilayer security. September 2017 – Swiss Bank in Your Pocket integrates EOT Wallet(Achived) October 2017 – BitVault®, the world’s first blockchain phone launches in London with integration of EOT for secure calling, secure messaging and secure browsing (First batch shipped) November 2017 – BitVault® Global App Store launches for developers to develop their own applications (Achived) November 2017 – Website EOT Payment Gateway for WordPress and WooCommerce (ACHIVED) December 2017 – Cryptodoc stores all your documents securely and encrypted on your PC December 2017 – Password Wallet stores all your passwords for applications and websites encrypted on your PC January 2018 – Smart Router for secure, encrypted internet which is direct, safe and easy January 2018 – EOT Camera, an Encryption of Things connected camera February 2018 – EOT Development Kit for hardware devices EOT payment gateway live on swissbankinyourpocket.com, Now you can buy SBIYP and BitVault using EOT coins More on the BitVault here:- https://swissbankinyourpocket.com/bitvault/]https://swissbankinyourpocket.com/bitvault/https://swissbankinyourpocket.com/bitvault-apps/]https://swissbankinyourpocket.com/bitvault-apps/https://bitcointalk.org/index.php?topic=2152534.0]https://bitcointalk.org/index.php?topic=2152534.0 JOIN US ON REDDIT : http://www.reddit.com/EncryptionOfThings]www.reddit.com/EncryptionOfThings JOIN US ON SLACK : [url=https://join.slack.com/t/eot-coin/shared_invite/enQtMjc3NzkxNzY5NzQ0LTFjMWI5NTJjOGEzYjU5ZDk0ZjRjZWE3MzBkNmI0MmQ2NTUzMTBkOGQ1YmEyNTllMmNiYzA3MGZjOGVmY2IyZGU The EOT Token is trading on the Waves Platform, TOKENS are 1:1 image of EOT coins, EOT coins can be converted to tokens and vice versa using gateway service in SBIYP hardware wallet. if you do not have that hardware wallet, you can contact members on slack who have purchased SBIYP to do that swap for you. TOKEN DETAILS Name : EOT Token (Verified) Identifier : GdnNbe6E3txF63gv3rxhpfxytTJtG7ZYyHAvWWrrEbK5 Total supply : 100,000,000 EOT token (EOT) markets added on the Tidex Exchange https://tidex.com/exchange/eot/btchttps://tidex.com/exchange/eot/waves EOT Coin details (currently minable) https://github.com/EmbeddedDownloads/EOTCoin windows wallet[/b] https://github.com/EmbeddedDownloads/EOTCoin/releases/download/v188.8.131.52/EOTCoin-win.exe windows Desktop wallet[/b] https://github.com/EmbeddedDownloads/EOT-Coin-Windows-Desktop-Wallet/releases/download/1.0/EOTCoinDesktopWallet1-0.zip MAC Wallet [/b] https://github.com/EmbeddedDownloads/EOTCoin/releases/download/v184.108.40.206/EOTCOIN-Qt-OSX-v1001.dmg WEB wallet [/b] http://eot.digital (Closing, please withdraw your coins) ANDROID wallet [/b] https://github.com/EmbeddedDownloads/EOTAndroidWallet/releases Block Explorer [/b] http://www.eot.digital:3622/ Block Explorer 2 [/b] http://www.eotcoin.info (created by [b]@Luanptit[/b]) [Block reward [/b] 100 Coins, [b] ALGORITHM [/b] SCRYPT, [b] BLOCK TIME [/b] 90 seconds MINING POOLS Official mining pool [/b] http://www.eot.digital:3001/ Getting Started [/b] minerd -a scrypt -o stratum+tcp://www.eot.digital:3256 -u WalletAddressWhereYouWantYourMiningCoins -p 1 unofficial Mining pools http://www.altminer.net http://antminepool.com http://coinminers.net/ http://www.vivocryptopool.com [red]Currently EOT is traded on WAVES DEX, Crypto-Bridge DEX and TIDEX. Big exchanges will be available soon, exchanges are in comkmunication. Opportunities are available with EOT - from Development, Mining, Trading as well as other business opportunities built around the EOT currency and the "Encryption of Things" [size=34px]Bitvault on Yahoo Finance https://finance.yahoo.com/news/bitvault-worlds-first-blockchain-phone-201600279.html [/size] [center][img width=770]https://i.imgur.com/UMIlRoC.png[/img][/center] [center][size=30px]Press release 4th October 2017 [/size] [size=30px]yahoo Finance https://finance.yahoo.com/news/bitvault-announces-london-launch-161000826.html?soc_src=community&soc_trk=tw [img]https://i.imgur.com/mBDZnN7.png[/img] Some Helpful Information [quote author=Story777 link=topic=2091616.msg21890405#msg21890405 date=1505551168] You have been keeping a great secret. I've been doing a bit of research with the technology behind this coin. It looks like ALOT of research has gone into this tech, since about 2004 and shortly after a patent for this P2P system was quickly issued. Bitvault (https://swissbankinyourpocket.com/product/bitvault/) who are using the worlds first blockchain phone as a secure communication device and ultimately taking [font=Verdana][b]encryption[/b][/font] to the Internet Of Things (IoT) keeping our personal and business data secure. All this is done using [b]EOT coin [/b](Encryption of Things). In todays world insecure devices are rampant. Here are a couple of links about the CIA being able to use insecure devices to 'cause accidents' http://www.sandiegouniontribune.com/news/cyber-life/sd-me-wikileaks-cia-20170307-story.html and https://www.washingtonpost.com/news/innovations/wp/2017/03/08/what-we-know-about-car-hacking-the-cia-and-those-wikileaks-claims/ It's scary to think a legal entity could posses such power over life. Just the mere fact alone the governing authority can request phone records (e.g. txt msgs, voice msgs or eavesdropping) proves most if not all telecommunication companies do not encrypt, otherwise whats the point on requesting the information!? (legal or not). Commercially sensitive information needs to be protected and most importantly in my opinion our [font=Verdana][b]rights[/b][/font] and the privacy of all citizens of the human race need to be protected. From my understanding BitVault is a platform for reference data. This would be data that is stored for compliance reasons such as e-mails, invoicing systems and check imaging (e.g. high quality imaging for x-rays, MRI scans etc) and a prototype was developed in 2004. This would means massive amount of data storage is required with fail-safe systems so a authorised user could access this information very very quickly. Three goals were needed to be achieved: Low cost, high reliability/availability and simplicity. This is the birth of Bitvault via EOT. Bitvault ultimately stores immutable objects with each new version being updated and identified with a 160-bit key. System stability is very important and must be immune to failure sequences. Parallel repair via indexing is one of the many strengths Bitvault has been able to demonstrate. BitVault is a back-end system that uses [u][b]Applications[/b][/u] to catalog object ID's. Using a catalog utility and indexing within an application prevented scalability bottlenecking under heavy loads. Fast forward 3 years to 2007 a very important decision was to [u][b]decentralise[/b][/u] BitVaults system. This in my opinion is one of the fundamental principles of cryptocurrency - [u][b]No one entity or person has any control of the data stored and only the authorised user can access this info[/b][/u]. Ultimate Security and thus personal safety (see above articles CIA hacks). BitVault using applications have been able to use provable communication and data storage with ease of retrieval with vital security measures. BitVault is not alone in researching solutions for security for the IoT, such as Venti and the like are making progress, however, BitVault is 'head and shoulders' above the few competitors and are already offering practical working solutions on the market with huge scalability that is cost effective. Well Done BitVault, well done EOT your secret is out and let the world embrace. author=Story777 link=topic=2091616.msg21462424#msg21462424 date=1504428317] I have had a response in Slack and it has satisfied my questions. Thank-you. For everyone information here it is: The currency was created with 200 Million EOT total supply on 7 July 2017 [ we showed it to the community a London Fintech week with the demonstration of the BitVault - fintechweek.com ] 100 Million was pre-mined and another 100 Million are currently being mined, 1 block every 90 seconds @ 100 coins per block. So the pre-mined coins were listed on waves as a token so that it can create a market for the coins while we are working to get listed on other exchanges. The 100 Million coins listed were distributed in several ways. Firstly, this was not an ICO because our business is already funded via private capital. We wanted to get the currency distributed a widely as possible. So most of the initial coins were given away to a number of interested parties. We distributed this to our whole development team, business partners, employees as well as to the waves and other communities. So we did not sell all these coins for the current price, most of it was given away for free to people that have an interest in our products and business. The price now is formed by whoever owns these coins. The tokens on the exchange is really a representation of the currency and as such has value because it can be interchanged, just like Bitcoin and Ethereum are on the waves exchange. This whole process is explained on page 4 of the waves whitepaper, I think they call it an asset-to-asset exchange which makes it possible to list any asset that exist on waves. Unfortunately waves only has gateways currently for Bitcoin, Ethereum, Waves, Euro and USD, so we have to develop our own gateway, which will be available on Nov 1. So to clarify 100,000,000 tokens costing $190M were not sold. It is a combination of airdrops, private sales and sales on the exchange. Some EOT coins are needed because: "A lot of EOT will be distributed through our devices. For example our encrypted routers are pre-loaded with EOT, so we need that stock and it will be distributed that way". And with the response to tokens on the Waves Exchange "This is how Bitcoin works on waves: - They created 21 Million BTC Tokens.. When you deposit Bitcoin into waves account, you receive an equal amount of tokens which you can either trade or even sent via the waves blockchain to another user.. Once you withdraw your tokens are exchanged for BTC and you receive it back into your BTC wallet.. Exactly the same for USD or EUR - You don't send Euro's to another client on waves if you transfer - you send a token that represents EUR -- This works exactly the w0083". These are the answers I was looking for and make a lot of sense now. This is indeed an exciting project. :) It's time to trade.... Now I have one question left.... Is there anyone using NiceHash to mine this coin?? I keep being disconnected because of the difficulty being too low. Can any one help? [quote author=Shews link=topic=2091616.msg22876983#msg22876983 date=1507755312] EOT (coin) is now tradable on the CryptoBridge Decentralised Exchange, you can sign up below. Please note this is for the EOT COIN ONLY, do not send tokens to this dex. This is a secure means to trade with the backend being on a blockchain. It is still in beta stage but has been working flawlessly so far. If you'd like more info I will post their website link is below. https://wallet.crypto-bridge.org/?r=388691 You can sign up with a local wallet mode, meaning you are the only one with access to your keys, this is most secure. There is also the option to sign up with and account if you require access to you funds on the go. More info: https://crypto-bridge.org/
Bitcoin block file pruning – What is it and how it works? The Bitcoin blockchain data contains all transaction history from the day Bitcoin was created to till date. With 1MB block size and 10 minutes block time the size of the chain grows larger and larger. Hence the storage capacity needed to run a full node will only keeps increasing in ... A paper wallet is ultimately the best Bitcoin wallet option due to its safety. Trezor/Ledger, Electrum, Blockchain.info and Coinbase round out the top five. Digital money that’s instant, private, and free from bank fees. Download our official wallet app and start using Bitcoin today. Read news, start mining, and buy BTC or BCH. Buying crypto like Bitcoin and Ether is as easy as verifying your identity, adding a payment and clicking "Buy". Sign up for our Wallet today. Create Wallet. Trade Crypto at the Exchange. Integrated with the Blockchain Wallet, our Exchange is a one-stop shop where you can deposit funds and place trades seamlessly in minutes. Get Started. Dive ... Storage for ip addresses to make a reconnect easier; peers.dat [Versions v0.7.0 and later] Storage for peer information to make a reconnect easier. This file uses a bitcoin-specific file format, unrelated to any database system. fee_estimates.dat [Versions v0.10.0 and later] Statistics used to estimate fees and priorities.
Please subscribe to my Channel: https://www.youtube.com/channel/UCp2H5Nwn6ry402F2pofZWXg Facebook: https://www.facebook.com/pages/Mrcluster87/152185951511384... Simba.Storage offers two-in-one solution for Bitcoin holders. Cold Storage is crypto friendly countries: Switzerland, Lichtenstein, UAE and New Zeeland. Simba Stable coin is an ERC-20 token which ... Following this guide will prune the blockchain on your computer and will save a lot of storage space. If Bitcoin is taking up too much space this is the best way to reduce the amount of space ... Are your bitcoins stuck in cold storage or on your paper wallet? Sure those are both GREAT places to keep them, but how do you get them out? What does 'sweep... Looking at all of the data storage potential of Bitcoin (BSV) Looking at all of the data storage potential of Bitcoin (BSV) ... John McAfee gives speech at the Barcelona Blockchain Week 2019 ...